Drive / Shutter / Image Stabilizer – Image Stabilizer
262
Image Stabilizer Settings
Set the image stabilizer operation to match the recording situation.
Picture: ¨ [ ] ¨ [ ] ¨ Select [Image Stabilizer]
Video: ¨ [ ] ¨ [ ] ¨ Select [Image Stabilizer]
[Operation Mode]
Sets the stabilization movement (blur) to match the recording method (normal,
panning). (Î[Operation Mode]: 264)
[E-Stabilization (Video)]
Camera shake during video recording is corrected along the vertical, horizontal, roll,
pitch, and yaw axes through the combined use of the in-lens, in-body, and electronic
image stabilizers. (5-Axis Hybrid Image Stabilizer)
• The [ ] on the recording screen changes to [ ] while [E-Stabilization (Video)]
is functioning.
• The angle of view may become narrower if set to [ON].
[Boost I.S. (Video)]
Increases the effectiveness of the image stabilizer during video recording.
This effect can help provide a stable composition when you want to perform recording
from a fixed perspective. (Î[Boost I.S. (Video)]: 265)
[Anamorphic (Video)]
You can switch to an image stabilizer that suits anamorphic recording. (Î[Anamorphic
(Video)]: 265)
[Lens Information]
When using a lens that does not have a communication function with the camera,
register the lens information in the camera. (Î[Lens Information]: 266)
To Next Page
Loading...
