Getting Started – Attaching a Lens
64
Attaching a Lens
≥Attaching a Lens Hood: 67
The camera can use the dedicated lenses that comply with the Micro Four
Thirds™ system lens mount specification (Micro Four Thirds mount).
For information about the lens that can be used (ÎLenses That Can Be
Used: 23)
•
Check that the camera on/off switch is set to [OFF].
• Change the lens in a location where there is not a lot of dirt and dust.
If dirt or dust gets on the lens (ÎDirt on the Image Sensor: 751)
• Change the lens while the lens cap is attached.
To Next Page
Loading...
