Getting Started – Inserting Cards (Optional)
63
Removing a Card
1 Open the card door.
2 Push the card until it clicks and then pull the card out straight.
• Check that the card access lights are off before removing the card.
CAUTION, HOT CARD
•
As indicated on the inside of the card door, the card may be hot just after
the camera has been used. Be careful when removing.
When a high temperature caution message is displayed on the screen,
do not remove the card immediately, but rather wait for it to cool down
and the message to disappear.
(E) CAUTION, HOT CARD
(E)
To Next Page
Loading...
