Drive / Shutter / Image Stabilizer – High Resolution mode
223
3
Decide on the composition and then fix the camera in
place.
• If blurring is detected, the High Resolution mode icon (A) blinks.
• When [Handheld High-Res] is set to [ON], the icon changes to [ ].
4
Start recording.
≥Press the shutter button fully.
•
With the default settings, [Shutter Delay] is activated, so there will be a gap in
time from when the shutter button is pressed until the shutter is released.
• The screen goes dark during recording.
• The recording state indication (red) (B) blinks.
Do not move the camera while it is blinking.
• You can continue recording when the merging process ends.
(A)
(B)
To Next Page
Loading...
