Materials – List of Default Settings/Custom Saving/Settings Available for Copying
801
*1 Default setting specifications vary depending on the country or area where the
camera was purchased.
*2 Depending on the country or area where the camera was purchased, this is not
displayed due to differences in specifications.
Menu Default setting
[Setup]: [Others]
[Clock Set] 0:00:00 1/1/2022
[Time Zone] *1 3
[System Frequency]
[59.94Hz (NTSC)] /
[50.00Hz (PAL)]
*1
33
[Pixel Refresh] —
[Sensor Cleaning] —
[Language] *1 33
[Firmware Version] —
[Approved Regulations]
*2
—
To Next Page
Loading...
