Advanced (Playback)
- 102 -
To print the date
After setting the number of prints, set/cancel printing with the recording date by touching
[Date].
• Depending on the photo printing store or the printer, the date may not be printed even if
you set to print the date. For further information, ask at your photo printing store or refer
to the operating instructions for the printer.
• The date cannot be printed on pictures stamped with text or date.
Note
• The number of prints can be set from 0 to 999.
• With a printer supporting PictBridge, the date print settings of the printer may take
precedence.
• It may not be possible to use the print settings with other equipment. In this case, cancel
all the settings, and reset the settings.
• The print setting cannot be set for motion pictures.
• If the le is not based on the DCF standard, the print setting cannot be set.
To Next Page
Loading...
Need help?
General
