Advanced (Playback)
- 104 -
[Copy] Copying pictures from the built-in memory to a card
You can copy the data of the pictures you have taken from the built-in memory to a card
or from a card to the built-in memory.
Select [Copy] on the [Playback] Mode menu. (P39)
Touch the copy destination.
N: All the picture data in the built-in memory are copied onto the card at one
time. " step 4.
M: One picture at a time is copied from the card to the built-in memory. " step
3.
Drag the screen horizontally to select an image, and then touch
[Set].
• For how to select a picture, see P31.
Touch [Yes].
• Do not turn the camera off at any point during the copying process.
• After copying, close the menu.
Note
• If a picture exists with the same name (folder number / le number) as the picture to be
copied in the copy destination when [N] is selected, a new folder is created and the
picture is copied.
• If a picture exists with the same name (folder number / le number) as the picture to be
copied in the copy destination when [M] is selected, that picture is not copied.
• It may take time to copy the picture data.
• Only pictures recorded with a Panasonic digital camera (LUMIX) will be copied.
(Even if the pictures were recorded with a Panasonic digital camera, you may not be
able to copy them if they were edited with a PC.)
• [Print Set], [Protect] or [Favorite] settings will not be copied. Perform the settings again
after copying is nished.
To Next Page
Loading...
