Advanced (Recording pictures)
- 57 -
Select [Selftimer] from the recording menu. (P39)
Select the setting.
• After setting, close the menu.
Press the shutter button halfway to
focus and then press it fully to take
the picture.
• The self-timer indicator A blinks and the
shutter is activated after 10 seconds (or 2
seconds).
• If you touch [Cancel] while the self-timer is
set, the self-timer setting is canceled.
Note
• When using a tripod etc., setting the self-timer to 2 seconds is a convenient way to avoid
the jitter caused by pressing the shutter button.
• When you press the shutter button once fully, the subject is automatically focused just
before recording. In dark places, the self-timer indicator will blink and then may turn on
brightly operating as an AF Assist Lamp to allow the camera to focus on the subject.
• We recommend using a tripod when recording with the self-timer.
• The number of pictures which can be taken in [Flash Burst] in Scene Mode is xed to 5.
• Self-timer cannot be set to 10 seconds in [Self Portrait] in Scene Mode.
• Setting of the self-timer cannot be performed in following conditions.
– In [Hi-Speed Burst] in Scene Mode
– When recording motion pictures
Taking Pictures with the Self-timer
[Rec] Mode: 4 1 < 5 /
To Next Page
Loading...
