Advanced (Recording pictures)
- 63 -
[Panorama Assist]
You can take pictures with connections suitable for creating panorama images.
Setting the recording direction
1 Select the direction to take picture.
• The horizontal / vertical guideline will be displayed.
2 Take the picture.
• You can retake the picture by selecting [Retake].
3 Touch [Next].
• Part of the recorded image is displayed as a transparent
image.
4 Take picture after moving the camera horizontally or
vertically so the transparent image overlaps.
• When taking the third and later pictures, repeat steps 3
and 4.
• You can retake the picture by selecting [Retake].
5 Touch [Exit].
Note
• The Focus, Zoom, Exposure, White Balance, Shutter speed and ISO sensitivity are xed
to the settings for the rst picture.
• We recommend using a tripod. When it is dark, we recommend using the self-timer for
taking pictures.
• The Shutter speed becomes a maximum of 8 seconds.
• The Shutter may remain closed (max. about 8 sec.) after taking the picture because of
signal processing. This is not a malfunction.
• The recorded images can be combined into panorama pictures using the software
“PHOTOfunSTUDIO” on the CD-ROM (supplied).
To Next Page
Loading...
