Others
- 125 -
[Memory Card Error
Format this card?]
• It is a format that cannot be used with this unit.
p Format the card again with the camera after saving necessary data on a PC etc. (P45)
[Please turn camera off and then on again] / [System Error]
• This message appears when the camera is not operating properly.
p Turn the camera off and on. If the message persists, contact the dealer or your
nearest Service Center.
[Memory card parameter error] / [This memory card cannot be used]
p Use a card compatible with this unit. (P16)
– SD Memory Card (8 MB to 2 GB)
– SDHC Memory Card (4 GB to 32 GB)
– SDXC Memory Card (48 GB, 64 GB)
[Insert SD card again] / [Try another card]
• An error has occurred accessing the card.
p Insert the card again.
p Insert a different card.
[Read Error/Write Error Please check the card]
• It has failed to read or write data.
p Remove the card after turning the power off. Insert the card again, turn the power on,
and try to read or write the data again.
• The card may be broken.
p Insert a different card.
[Motion recording was cancelled due to the limitation of the writing speed of the
card]
• Use a card with SD Speed Class with “Class 6” or higher when recording motion
pictures.
• In the event that it stops even after using a “Class 6” card or higher, the data writing
speed has deteriorated so it is recommended to make a backup and then format (P45).
Depending on the type of card, motion picture recording may stop in the middle.
[This card is not formatted with this camera, and not suitable for movie recording.]
• The writing speed is lower if the card has been formatted using a PC or other
equipment. As a consequence, motion picture recording may stop in the middle. If this
happens, make a backup of the data and format (P45) the card in this unit.
To Next Page
Loading...
Need help?
General
