Others
- 133 -
The picture cannot be printed when the camera is connected to a printer.
• Pictures cannot be printed using a printer which does not support PictBridge.
• Set to [PictBridge(PTP)] in [USB Mode]. (P111)
The ends of the pictures are cut at printing.
p When using a printer with a cropping or borderless printing function, cancel this
function before printing. (For details, refer to the operating instructions for the printer.)
p When you order photo studios to print pictures, ask the photo studio if the 16:9
pictures can be printed.
Others
Camera rattles if shaken.
p This sound is made by the lens movement and is not a fault.
An unreadable language was selected by mistake.
p Touch the [Setup] menu icon [e] and then select the [9] icon to set the desired
language. (P46)
A red lamp sometimes turns on when the shutter button is pressed halfway.
• In dark places, the AF Assist Lamp (P85) lights red to make it easier to focus on a subject.
The AF Assist Lamp does not turn on.
• Is [AF Assist Lamp] on the [Rec] Mode menu set to [ON]? (P85)
• The AF Assist Lamp does not turn on in bright places.
The camera becomes warm.
• The surface of the camera may become warm during use. This does not affect the
performance or quality of the camera.
The lens clicks.
• When the brightness changes due to zoom or camera movement etc., the lens may
click and the picture on the screen may drastically change. However, the picture is not
affected. The sound is caused by the automatic adjustment of the aperture. This is not a
malfunction.
The clock is reset.
• If you do not use the camera for a long time, the clock may be reset.
p When the message [Please set the clock] appears, set the clock again. (P18)
To Next Page
Loading...
Need help?
General
