Preparation
- 17 -
While accessing the built-in memory or card
The access indication lights red.
[2] (Built-in Memory) / [3] (Card)
While lighting, operations such as writing/reading pictures, deleting or formatting are
being performed. Do not turn the power off, or do not remove the battery, card or AC
adaptor (optional).
Also, do not subject the camera to vibration, impact or static electricity. Access operation
may be stopped midway. The data may be damaged or malfunction may occur.
Note
• When the Write-Protect switch A is set to the [LOCK] position, no further
data writing, deletion or formatting is possible. The ability to write, delete and
format data is restored when the switch is returned to its original position.
• The data on the built-in memory or the card may be damaged or lost due to
electromagnetic waves, static electricity or breakdown of the camera or the
card. We recommend storing important data on a PC etc.
• Do not format the card on your PC or other equipment. Format it on the camera only to
ensure proper operation. (P45)
• Keep the Memory Card out of reach of children to prevent swallowing.
To Next Page
Loading...
Need help?
General
