Basic
- 43 -
[LCD Mode]
These menu settings make it easier to see the LCD
monitor when you are in bright places or when you are
holding the camera high above your head.
x [Auto Power LCD]:
The brightness is adjusted automatically depending on
how bright it is around the camera.
c [Power LCD]:
The LCD monitor becomes brighter and easier to see
even when taking pictures outdoors.
y [High Angle]:
The LCD monitor becomes easier to see when holding
the camera above your head to take pictures.
[OFF]
• The brightness of the pictures displayed on the LCD monitor is increased so some
subjects may appear differently from actuality on the LCD monitor. However, this does
not affect the recorded pictures.
• The LCD Monitor automatically returns to normal brightness after 30 seconds when
recording in [Power LCD] Mode. Press any button to make the LCD monitor bright again.
• In Intelligent Auto Mode, the setting is xed to [Auto Power LCD].
• [High Angle] is canceled when power is turned off manually or by [Auto Power Off]
automatically.
• The number of recordable pictures decreases in [LCD Mode].
• [Auto Power LCD] and [High Angle] cannot be selected in Playback mode.
[Focus Icon]
Change the focus icon.
[h] / [i] / [j] / [k] / [l] / [m]
[Auto Power Off]
If no operation is performed for a certain period of time,
the power is automatically turned off.
[2 MIN.] / [5 MIN.] / [10 MIN.] / [OFF]
• This does not work in the following cases.
– When using the AC adaptor
– When connecting to a PC or a printer
– When recording or playing back motion pictures
– During a slide show
– During an auto demo
• The setting is xed in the following cases.
– [5 MIN.] in Intelligent Auto Mode and [10 MIN.] while paused in Slide Show
To Next Page
Loading...
Need help?
General
