Advanced (Recording pictures)
- 75 -
Touch [Destination].
• Depending on the setting, the time at the travel destination area or the home area
is displayed.
C
D
Touch [w] or [q] to select the area that the
travel destination is in, and touch [Set].
CCurrent time of the destination area
DTime difference
• If daylight saving time [z] is used at the travel
destination, touch [z]. (The time advances
by one hour.) Touch [z] again to return to the
original time.
• After setting, close the menu.
Note
• Return the setting to [Home] when the vacation is nished by performing steps 1, 2 and 3
.
• If [Home] is already set, change only the travel destination, and use.
• If you cannot nd the travel destination in the areas displayed on the screen, set by the
time difference from the home area.
• The travel destination icon [w] appears when playing back pictures taken at the travel
destination.
To Next Page
Loading...
