Preparation
11
Charging the Battery
1 Connect the AC cable.
• The [POWER] indicator A lights.
2 Attach the battery to the AC adaptor.
(1 # 2)
• The [CHARGE] indicator B lights and
charging starts.
3 When the [CHARGE] indicator B
turns off, charging is finished.
• Charging is finished in about
90 minutes.
4 Remove the battery from the AC
adaptor.
• The battery cannot be charged when the
DC cable is connected to the AC adaptor.
• After use, be sure to disconnect the AC
cable.
• The battery becomes warm after use/
charge or during the charge. The camera
also becomes warm during use. However, it
is not a malfunction.
• The battery/AC adaptor supplied with this
camera is exclusively designed for this
camera. Do not use with any other
equipment.
THE SOCKET OUTLET SHALL BE
INSTALLED NEAR THE EQUIPMENT
AND SHALL BE EASILY ACCESSIBLE.
4
2
1
FZ2-PP.book 11 ページ ２００３年９月２６日 金曜日 午後１２時１分
To Next Page
Loading...
Need help?
General
