Recording images (advanced)
62
Taking Pictures using Burst Mode
By continuously pressing the shutter button, it
is possible to record in burst mode.
[Preparation]
• Set the mode dial except for [ ]/[ ].
(P25)
1 Press [ ].
• Every time you press it, what is
displayed changes as shown below.
: High speed
: Low speed
When these indicators are not
displayed, burst mode is cancelled.
2 Press the shutter button halfway to
lock the focus, then press it fully to
take pictures in sequence.
• It is possible to record 4 frames in 1 second
in burst mode, at a shutter speed higher
than 1/60th, but the flash does not fire
simultaneously.
• If the flash fires, it is possible to record only
1frame.
• In simple mode [ ], the shutter speed is
fixed to the low speed.
• You cannot take still pictures with audio in
the burst mode.
• When setting auto bracket and the burst
mode simultaneously, auto bracket will be
performed.
• Burst mode will not perform as described if
a MultiMediaCard is used in place of an SD
Memory Card. The reading/writing speed of
a MultiMediaCard is slower than that of an
SD Memory Card.
Burst speed
Number of recordable
pictures
4 frames/
second
Max
4 frames
Max
7 frames
2 frames/
second
Max
4 frames
Max
7 frames
H
L
2
1
LH
OFF
H
L
FZ2-PP.book 62 ページ ２００３年９月２６日 金曜日 午後１２時１分
To Next Page
Loading...
