Recording images (advanced)
45
Taking Pictures with Aperture-priority AE
When aperture value is set, the shutter speed
is automatically set from 1 second to
1/2000th according to the subject brightness.
(However, the speed range is changed from
1/30th to 1/2000th when flash fires.) Altering
the aperture value changes the depth of field
of the picture.
Manipulating this value can change the
sharpness of the background of your picture.
1 Set the mode dial to [P/A/S]. (P25)
2 Press the [MENU] button.
3 Press 3/4 to select [AE MODE].
4 Press 2/1 to set to [A].
5 Press the [MENU] button.
• The menu will disappear.
6 Press 3.
7 Press 2/1 to set the aperture value.
8 Press the 4/[REVIEW/SET] button.
• The adjustment display will disappear.
9 Take a picture.
• The brightness of the LCD monitor/Viewfinder may differ from that of the actual
images. Check it using review function or setting to playback mode.
• The recordable range is between 3.94 feet (120 cm) – ¶ (Tele) and 0.16 feet
(5 cm) – ¶ (Wide).
• The available setting range of the aperture value is from F2.8 to F8.0.
• If the subject is too bright, set a larger aperture value, if too dim, set a smaller
aperture value.
• It is not possible to select ISO sensitivity [AUTO].
• If the aperture value is not properly set, the color of the F and the shutter speed
values on the LCD monitor/Viewfinder become red.
2,5
3,4,6,7,8
9
1
REC
1
/
4
SETUP
3,4
W.BALANCE
AUTO
PICT.SIZE
AE MODE
QUALITY
A S
1600
AE
P
SELECT
SET
EXIT
MENU
7
APERTURE
SELECT
EXIT
F2.8
FZ2-PP.book 45 ページ ２００３年９月２６日 金曜日 午後１２時１分
To Next Page
Loading...
Need help?
General
