Recording images (advanced)
53
Compensating the Exposure
In some situations the illumination of the
background and your subject may differ. Auto
exposure systems may not always calculate
the exposure correctly. This is a normal
situation. This feature allows you to manually
compensate the exposure.
[Preparation]
• Set the mode dial except for [ ]/[ ]/
[ ]. (P25)
1 Press 3 until [ EXPOSURE] is
selected.
2 Press 2/1 to compensate the
exposure.
• You can compensate from j2EV to
i2 EV with 1/3 EV step.
(EV is an abbreviation of Exposure
Value, and it is the amount of light
given to the CCD by the aperture value
and the shutter speed)
3 Press the 4/[
REVIEW/SET
] button.
• The adjustment display will disappear.
• The exposure compensation indication
1 will appear.
4 Take a picture.
• Depending on brightness of the subject, the range for which it is possible to
compensate the exposure will be limited.
1,2,3
4
3
EXPOSURE
EXIT
2
SELECT
P
+
1
/
3
1600
FZ2-PP.book 53 ページ ２００３年９月２６日 金曜日 午後１２時１分
To Next Page
Loading...
Need help?
General
