Technical use
84
Setting up the Power Save Mode
The Power Save Mode can automatically turn
the camera off if it has not been used for a
predetermined amount of time.
1 Press the [MENU] button.
2 Press 1 to open the setup menu.
3 Press 3/4 to select [POWER SAVE].
4 Press 2/1 to choose the setting time.
•[2MIN.]
•[5MIN.]
• [10MIN.]
• [OFF]: The power is not turned off
automatically.
5 Press the [MENU] button.
• The menu will disappear.
• If you want to cancel the power save mode, turn the power switch to [ON] again
after turning it to [OFF], or press the shutter button.
• When using the AC adaptor/connecting to a PC/recording a motion image/playing
back a motion image/during Slide Show, the power save mode is not available.
• In simple mode [ ], the power save is fixed to [2MIN.].
1,5
2,3,4
3,4
REC
SETUP
1
/
2
MONITOR
AUTO REVIEW
OFF
POWER SAVE
BEEP
5MIN. 10MIN.
OFF
2MIN.
SELECT
SET
EXIT
MENU
FZ2-PP.book 84 ページ ２００３年９月２６日 金曜日 午後１２時１分
To Next Page
Loading...
