Basic
- 54 -
∫ Switching the displayed image while maintaining the Playback Zoom
You can switch the displayed image while maintaining the same zoom magnification and
zoom position for the Playback Zoom.
Switch to picture select operation by
pressing the rear dial during Playback
Zoom, and select pictures by touching
[]/[].
• It is also possible to forward or rewind the image by pressing
2/1 of the cursor button.
• The zoom position returns to the center in the following
images.
– Images with different aspect ratios
– Images with different numbers of recorded pixels
– Images with a different rotation direction (when [ROTATE DISP.] is set to [ON])
Using the Playback Zoom
Touch the part to enlarge firmly.
1k>2k>4k>8k>16k
A The zoom position indication
• You can also enlarge/reduce the picture by rotating the rear
dial.
• The more a picture is enlarged, the more its quality
deteriorates.
• You can move the enlarged part by dragging (P11) the image.
• Picture will return to the original size (1k) by touching [ ].
• When you touch [ ], the magnification becomes lower.
To Next Page
Loading...
