Recording
- 122 -
This takes pictures of a baby with a healthy complexion. When you use the flash, the light
from it is weaker than usual.
It is possible to set different birthdays and names for [BABY1] and [BABY2]. You can
select to have these appear at the time of playback, or have them stamped on the
recorded image using [TEXT STAMP] (P166).
∫ Birthday/Name setting
1 Press 3/4 to select [AGE] or [NAME] and then press
[MENU/SET].
2 Press 3/4 to select [SET] and then press [MENU/SET].
3 Enter the birthday or name.
•
When the birthday or name is set, [AGE] or [NAME] is automatically set to [ON].
• If [ON] is selected when the birthday or name has not been registered, the setting screen
appears automatically.
4 Press 3/4 to select [EXIT] and then press [MENU/SET] to finish.
∫ To cancel [AGE] and [NAME]
Select the [OFF] setting in step
2.
Note
•
Still pictures recorded during motion picture recording ([ ] (Motion picture priorities))
(P50) will not record age or name.
• The age and name can be printed out using the “PHOTOfunSTUDIO” bundled software on the
CD-ROM (supplied).
• If [AGE] or [NAME] is set to [OFF] even when the birthday or name has been set, the age or
name will not be displayed.
[BABY1]/[BABY2]
Birthday: 2/1: Select the items (year/month/day).
3/4: Setting.
[MENU/SET]: Set.
Name: For details on how to enter characters, refer to
“Entering Text” on P135.
To Next Page
Loading...
