37
(ENG) VQT3T96
[¦ BUTTON SWITCH]
It is possible to set how the [¦] button to toggle to Intelligent
Auto Mode will operate.
[ BUTTON]
Enables/disables the motion picture button.
[ REC AREA]
This changes the angle of view during motion picture recording
and still picture recording.
[REMAINING DISP.]
This will switch display between the number of recordable
pictures and available recording time.
[PLAY ON LCD]
When you switch from Recording Mode to Playback Mode, the
LCD monitor switches on.
[TOUCH SETTINGS]
Enables/disables the Touch operation.
[TOUCH SCROLL]
This allows you to set the speed of continuously forwarding or
rewinding pictures using touch operation.
[DIAL GUIDE] Set whether or not to display the dial operation guide.
[MENU RESUME]
The last operated menu position is saved even if the camera is
turned off.
[PIXEL REFRESH]
It will perform optimization of imaging device and image
processing.
[SENSOR CLEANING]
Dust reduction to blow off the debris and dust that have affixed
to the front of the imaging device is performed.
[SHOOT W/O LENS]
When no lens is attached to the camera, the shutter is set to cut
out.
DMC-GX1X&GX1K&GX1PP-VQT3T96_eng.book 37 ページ ２０１１年１０月１３日 木曜日 午後２時５４分
To Next Page
Loading...
