Panasonic LUMIX DMC-LX2 User Manual

Connecting to other equipment
109
VQT0Y44
• Do not use any other USB connection
cables except the supplied one.
• While [ACCESS] is being displayed, do
not disconnect the USB connection cable.
• Data transmission takes time when a card
contains a large number of pictures.
• If the remaining battery power is
exhausted during communication, the
recorded data may be damaged. When
you connect the camera to the PC, use a
battery with sufficient battery power (P14)
or the AC adaptor (DMW-AC5; optional).
• If the remaining battery power becomes
low while the camera and the PC are
communicating, the status indicator blinks
and the alarm beeps. In this case, stop
the communication at once on the PC.
• When connecting the camera to a
Windows 2000 OS PC with the USB
connection cable, do not replace the
card while the camera and the PC are
connected. The information on the
card may be damaged. Disconnect the
USB connection cable before replacing
the card.
• Pictures edited or rotated with a PC may
be displayed in black in playback mode
(P36), multi playback (P77) and calendar
playback (P78).
• For information about this, refer to the
separate operating instructions for PC
connection.
• Refer to the operating instructions of the
PC, too.
• If a card is not inserted when the camera
is connected to the PC, you can edit or
access the picture data on the built-in
memory. If a card is inserted, you can edit
or access the picture data on it.
• You cannot switch between the built-in
memory and the card while the camera is
connected to the PC. When you want to
switch between the built-in memory and
the card, disconnect the USB connection
cable, insert (or remove) the card and
then connect the USB connection cable to
the PC again.
• When you change the mode dial to print
mode [ ] with the camera connected to
the PC, [PLEASE RE-CONNECT THE
PRINTER.] appears on the camera’s LCD
monitor. Before reconnecting the camera
to a printer, change the mode from [ ]
to another one and make sure that data
transmission is not in progress.
([ACCESS] appears on the camera’s LCD
monitor while data transmission is in
progress.)

Panasonic LUMIX DMC-LX2 Specifications

General

Megapixel	10.2 MP
Camera type	Compact camera
Sensor type	CCD
Image stabilizer	Yes
Supported aspect ratios	4:3, 16:9
Digital zoom	4 x
Focal length range	6.3 - 25.2 mm
Digital SLR	No
Camera shutter speed	1/4 - 1/2000 s
Normal focusing range	0.5 - ∞ m
Auto focusing (AF) modes	Continuous Auto Focus
Macro focusing range (wide)	1 - ∞ m
Motion JPEG frame rate	30 fps
Maximum video resolution	640 x 480 pixels
Display diagonal	2.8 \
Display resolution (numeric)	207000 pixels
USB version	2.0
Scene modes	beach, Candlelight, Children, Close-up (macro), Fireworks, Night, Night landscape, Night portrait, Portrait, self-portrait, Sports, Sunset, Landscape (scenery)
Image editing	resizing, rotating, trimming
White balance	auto, Cloudy, daylight, flash, Shade
Camera playback	movie, single image, slide show, thumbnails
Self-timer delay	2 s
Product color	Black
Battery capacity	1150 mAh
Bundled software	LUMIX Simple Viewer, PhotofunStudio SILKPIX DEVELOPER STUDIO ArcSoft Camera Suite (ArcSoft PhotoImpression, ArcSoft PanoramaMaker), Adobe Reader, Quick Time
Flash modes	auto, Flash off, Red-eye reduction, Slow synchronization
Compatible memory cards	mmc, sd
Light metering	Spot
Light exposure modes	aperture priority AE, auto, manual, shutter priority AE

Weight and Dimensions

Depth	26.3 mm
Width	105.7 mm
Height	55.8 mm
Weight	217 g