Advanced
49
VQT0Y44
Taking Pictures using Auto Bracket
In this mode, 3 pictures are automatically
recorded by each press of the shutter
button according to the compensation
range of the exposure.
You can select the desired exposure
among the 3 types of pictures.
1
Press e [C] several times until
[B AUTO BRACKET] appears,
set the compensation range of
the exposure with w/q.
• You can select [OFF] (0), [±1/3 EV],
[±2/3 EV] or [±1 EV].
• When you do not use auto bracket, select
[OFF] (0).
2
Press [MENU/SET] to finish.
• You can also press the shutter
button halfway to finish.
• When setting auto bracket, the auto
bracket icon [B] appears on the screen.
• When taking pictures using auto bracket
after the exposure compensation, the
pictures are based on the compensated
exposure. When the exposure is
compensated, the exposure
compensation value appears at bottom
left of the screen.
• When setting auto bracket and the burst
mode simultaneously, auto bracket will be
performed.
• Auto review works if you activate auto
bracket, irrespective of the auto review
setting. (But the picture is not enlarged.)
You cannot change the auto review
setting in the setup menu.
• When setting auto bracket, you cannot
use the audio recording function.
• The exposure may not be compensated
with auto bracket depending on the
brightness of the subject.
• You cannot use auto bracket if you have
set quality to [RAW].
• In shutter-priority AE and manual
exposure, if the shutter speed is set to
more than 1 second auto bracket is
disabled.
• When the flash is activated, you can take
only 1 picture.
• You cannot use auto bracket when there
are only one or two pictures remaining.
• You cannot use auto bracket in [SPORTS]
(P63), [STARRY SKY] (P67) and
[BABY1]/[BABY2] (P69) in scene mode.
• You cannot take pictures using auto
bracket when the ISO sensitivity is set to
[].
MENU
AUTO BRACKET
SELECT EXIT
ISO
To Next Page
Loading...
Need help?
General
Weight and Dimensions
