EasyManua.ls Logo

Panasonic LUMIX DMC-LX2

Panasonic LUMIX DMC-LX2
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Preparation
13
VQT0Y44
Charging the Battery with the Charger
The battery is not charged when the
camera is shipped. Charge the battery
before use.
1
Attach the battery with attention
to the direction of the battery.
2
Connect the charger to the
electrical outlet.
• When the [CHARGE] indicator A lights
in green, charging starts.
• When the [CHARGE] indicator
A turns
off (in about 130 minutes), charging is
completed.
• Refer to P14 when the [CHARGE]
indicator blinks.
B: Open until it clicks.
3
Detach the battery after charging
is complete.
• After charging is completed, be sure to
disconnect the charger from the electrical
outlet.
• The battery becomes warm after use/
charge or during charge. The camera also
becomes warm during use. However, this
is not a malfunction with the camera.
• The battery will discharge if left for a long
time after charging. Recharge it.
• You can recharge the consumed portion
before exhausting the remaining charge.
• Use the dedicated charger and battery.
• Charge the battery with the charger
indoors.
• Do not disassemble or modify the
charger.
A

Table of Contents

Related product manuals