Panasonic LUMIX DMC-LX2 User Manual

Connecting to other equipment
110
VQT0Y44
Connecting to a PictBridge-compliant Printer
By connecting the camera directly to a printer
supporting PictBridge via the USB connection
cable (supplied), you can select the pictures to
be printed or start printing on the LCD monitor.
Make the necessary settings on your printer
beforehand. (Read your printer’s operating
instructions.)
1 Turn on the camera and the
printer.
2 Set the mode dial to [ ].
• [PLEASE CONNECT TO THE PRINTER]
appears.
3 Connect the camera to a printer
via the USB connection cable A
(supplied).
• Connect the USB connection cable with
the [f] mark facing the [w] mark on
the [DIGITAL] socket.
• Hold
C and then insert or pull the USB
connection cable straight.
• Do not use any other USB connection
cables except the supplied one.
•
When you connect the camera to a printer without
setting the mode dial to
[] , remove the cable,
set the mode dial to
[] , turn the camera and
the printer off and on, and connect again.
• If a card is not inserted when the camera is
connected to the printer, you can print the
picture data on the built-in memory. If a card is
inserted, you can print the picture data on it.
• You cannot switch between the built-in memory
and the card while the camera is connected to
the printer. When you want to switch between
the built-in memory and the card, disconnect
the USB connection cable, insert (or remove)
the card and then connect the USB connection
cable to the printer again.
• To print the age in [BABY1]/[BABY2] (P69) in
scene mode or the departure date for [TRAVEL
DATE] (P70), use the software [LUMIX Simple
Viewer] or [PHOTOfunSTUDIO-viewer-] in the
CD-ROM (supplied) and print from the PC. For
information about this, refer to the separate
operating instructions for PC connection.
• To find out more about PictBridge compliant
printers, contact your local dealer.
n To connect
A : USB connection cable (supplied)
B : AC adaptor (DMW-AC5; optional)
•
It may take time to print some pictures.
Therefore, we recommend using a battery with
sufficient power (P14) or the AC adaptor (DMW-
AC5; optional) when you connect to a printer.
• Make sure this unit is off before
connecting or disconnecting the AC
adaptor (DMW-AC5; optional).
A
C
B

Panasonic LUMIX DMC-LX2 Specifications

General

Megapixel	10.2 MP
Camera type	Compact camera
Sensor type	CCD
Image stabilizer	Yes
Supported aspect ratios	4:3, 16:9
Digital zoom	4 x
Focal length range	6.3 - 25.2 mm
Digital SLR	No
Camera shutter speed	1/4 - 1/2000 s
Normal focusing range	0.5 - ∞ m
Auto focusing (AF) modes	Continuous Auto Focus
Macro focusing range (wide)	1 - ∞ m
Motion JPEG frame rate	30 fps
Maximum video resolution	640 x 480 pixels
Display diagonal	2.8 \
Display resolution (numeric)	207000 pixels
USB version	2.0
Scene modes	beach, Candlelight, Children, Close-up (macro), Fireworks, Night, Night landscape, Night portrait, Portrait, self-portrait, Sports, Sunset, Landscape (scenery)
Image editing	resizing, rotating, trimming
White balance	auto, Cloudy, daylight, flash, Shade
Camera playback	movie, single image, slide show, thumbnails
Self-timer delay	2 s
Product color	Black
Battery capacity	1150 mAh
Bundled software	LUMIX Simple Viewer, PhotofunStudio SILKPIX DEVELOPER STUDIO ArcSoft Camera Suite (ArcSoft PhotoImpression, ArcSoft PanoramaMaker), Adobe Reader, Quick Time
Flash modes	auto, Flash off, Red-eye reduction, Slow synchronization
Compatible memory cards	mmc, sd
Light metering	Spot
Light exposure modes	aperture priority AE, auto, manual, shutter priority AE

Weight and Dimensions

Depth	26.3 mm
Width	105.7 mm
Height	55.8 mm
Weight	217 g