Basic
28
VQT0Y44
•
If the exposure is not adequate when the
shutter button is pressed halfway, the
aperture value and shutter speed turns red.
• When 10 or more seconds have passed
after the Program shift becomes effective,
the status to activate the Program shift is
canceled and returned to the Program AE
mode. However, the setting on the
Program shift is memorized.
•
The Program shift may not be activated
depending on the brightness of the subject.
•
The Program shift does not activate when
the ISO sensitivity is set to [ ].
n Tips for taking good pictures
• Hold the camera gently with both hands,
keep arms stationary at your side and
stand with your feet slightly apart.
• Be careful not to move the camera when
you press the shutter button.
•
Do not cover the microphone or the AF
assist lamp with your finger or other objects.
• Do not cover the photo flash with your
finger or other objects.
• Do not touch the lens part.
• If the LCD monitor screen is difficult to see
because of light from the sun etc. shining
on it, we recommend using your hand or
another object to block the light when
using the camera.
1 : When holding the camera sideways
2 : When holding the camera vertically
A : Photo flash
B : AF assist lamp
n Direction detection function
• If you take pictures by holding the camera
vertically, the information of the rotation
on the pictures are automatically added
and recorded to the pictures.
When [ROTATE DISP.] (P97) is set to
[ON], you can rotate and display pictures
on the screen or the TV according to the
information of the rotation on the pictures.
• This function may not work properly on
pictures recorded by aiming the camera
up or down.
• In motion picture mode [i] or [FLIP
ANIM.], you cannot use the direction
detection function.
ISO
B
A
1
B
A
2
To Next Page
Loading...
Need help?
General
Weight and Dimensions
