Panasonic minas a series - Absolute Driver; How to install the battery

- App. 26 -
1 Remove the screw.
2 Remove the cover,
and cut away its
upper right corner.
Terminal block cover
3 Replace the cover,
and tighten the screw.
Use nippers.
"Absolute" Driver
How to install the battery
1. Cut away the upper right corner of the
terminal block cover for types 1 through 3
1Connect the cable.
Battery holder
2 Set the lug
into place.
Note:
Make sure that the cable
is not caught between
the driver and holder.
3 Snap the upper lug into place
while pressing the mark.
2. Insert the battery into the holder.
+
-
+
-
1Insert the battery
Battery holder
(optional: DVOP2061)
Battery
DVOP2060
3. Set the holder to the driver.
Driver