- App. 27 -
Appendixes
Battery cover
1
Press mark
and remove the cover.
Insert the coverwhile
pressing mark.
Driver
1
Press the lug
and set the battery.
2
Connect the
cable.
Connector
Battery holder
1.Remove the battery cover for Types 4-2, 4-3 and 5
3. Snap the battery
Å@Å@cover into place
2. Set the battery into the holder.
1. Never use a damaged (liquid leaking) battery.
2. Make sure that the battery cable is firmly connected. Otherwise electric
contact may be lost due to aging.
<Notes>
If using two batteries simultaneously, one at the driver and other one at the
controller, a loop circuit is made, which may cause troubles.
To Next Page
Loading...
