Panasonic minas a series - Details of Parameters; Auxiliary Function Mode; Absolute Encoder Clear Mode

- App. 66 -
Details of Parameters (Auxiliary Function Mode)
Absolute Encoder Clear Mode
This mode is to clear the multi-turn data of the absolute encoder, and clear the alarms regarding the encoder.
Procedure
1) Select the absolute encoder clear mode (refer to page 39 in Appendix).
will appear. Press SET button to display
2) The mode is ready for
execution.
SET
The mode is started.
The clearing operation
will complete instanta-
neously.
Clearing completed Error
<Notes>
If you execute this mode for a driver with an incremental encoder,
will appear.
After executing the absolute encoder clear mode, turn off the power of the driver, and then
turn it on again.
Keep pressing UP button
(for about three seconds). The
number of short bars (-) will in-
crease.