Camera Recording
3
Before you begin...
• Connect Camcorder to power source.
• Insert cassette with record tab (page 13).
1
2
3
1
4
5
5
Built-In Twin Capsule
2-Way Microphone
System
Set P WE__PQ__J_q__C___ERA.
Lens Cover opens. EVF
• Be sure POWER
is fully turned to
CAMERA
position,
PAUSE1
Record/Pause
mode.
Look into Viewfinder and adjust
Vision Adiustment control to your
eyesight.
Slide TAPE SPEED to SP or SLP
(page 13),
Press _ to start or
pause recording.
REC lamp lights during recording.
Tally lamp also lights if set to ON
(page 33).
RECORD
Set Power to OFF when finished.
Lamp
• To remove cassette,
slide TAPE EJECT in Record/
Pause mode. (page 13).
Note:
• When Camcorder is aimed at excessively
brightobjects, or bright lights, a vertical bar
may appear in the picture. This is normal for
the CCD pick-up. Try to avoid this when
possible.
20
To Next Page
Loading...
Need help?
General