High Speed Shutter
Improves Still or Slow Motion playback picture of high speed subjects (e.g. a tennis
stroke), when viewed on Camcorder or 3 or 4 head VCR.
Before you begin...
• Connect Camcorder to power source.
• Set POWER to CAMERA.
• Insert cassette with record tab (page 13).
In AUTO mode (no indication in EVF), shutter speed is auto-adjusted from 1/60 to 1/350
according to subject brightness.
• AUTO mode is selected each time POWER is set to CAMERA.
II _VAP.til! m I_=Jl FJ_ I [,] i B
The faster the shutter speed, the more light is needed for proper picture and color quality.
High Speed Shutter indication flashes if light is inadequate. Provide additional light.
HIGH SPEED
SHu'rrER
EVF Indications
!
No Indication
1/60
1/100
11250
11500
111000
112000
114000
1110000
I
1
2
Press HIGH SPEED SHUTTER while
recording.
Press repeatedly to change shutter
speed. (See below, left.)
Note:
• Provide additional halogen or tungsten
light for use indoors or in poor light.
Fluorescent light degrades picture.
• Auto Focus may not function properly if
high speed shutter is used in inadequate
light.
• Setting reverts to AUTO each time
POWER is set to CAMERA.
32
To Next Page
Loading...
Need help?
General