Focus
MANUAL
FOCUS
Before you begin...
• Connect Camcorder to power source.
• Set POWER to CAMERA.
Camcorder automatically focuses on
subject even during zooming,
Auto Focus is on when "MF" is not
displayed in EVF. Push MANUAL FOCUS
to remove "MF" in EVF if necessary.
Use Manual Focus (MF) when :
• recording through glass.
• lighting is poor.
• subject is far away with Objects in foreground.
• subject has distinct horizontal lines.
• subject is not centered in Viewfinder.
• subject has shiny surface.
• subject isslanted.
• subject is bright and flat, like a white wall.
• subject has fast motion, like a golfswing.
4
2
1
2
3
4
Push MANUAL FOCUS so "MF"
(Manual Focus) appears in EVF.
EVF Indication
Hold down "T" (telephoto) on
POWER ZOOM to maximum zoom
in.
Turn MANUAL FOCUS until
subject is in focus.
• Back away from subject if necessary.
Hold down "W" (_wide anale) on
POWER ZOOM as desired.
• Refocus as needed
when aiming at new scenes.
i lTlI';,[H iDI IDIH ! !..11_ [o].'f:_! I i_d_l
Auto Focus functions up to 1/2 inch (12.7mm) from subject.
Hold down "W" on POWER ZOOM to maximum wide angle.
Bring Camcorder up close to the subject.
31
To Next Page
Loading...
Need help?
General