－ 48 －
6.OPERATION
<Format tab>
Sets a graph display format.
“Display”: Check a box to display the target graph.
“Ref wave”: Check this box to display the reference waveform graph.
Check the boxes to change the color and line thickness
of the graph.
Measuring waveform graphics
1 Specify the waveform graphic measurement items and
conditions.
2 Click (Measure) on the tool bar.
After measurement is started, the bar indicating the
state of transfer will change.
※ When the waveform graphic screen is closed, the measuring
conditions are stored. Measurement will be performed under
the same conditions when you open the window next time.
To Next Page
Loading...
