Contents
Quick steps
J
Set up your projector1.
See “Setting up” on page 4.
Connect with other devices2.
See “Connections” on page 8.
Prepare the remote control3.
See “Remote control” of the
operating instructions.
Start projecting4.
See “Switching the projector
on/off” on page 9.
Adjust the image5.
See “Menu Navigation” on
page 16.
Getting Started
Setting up ................................................. 4
Screen size and throw distance .................. 4
Projection method ....................................... 5
Front leg adjusters and throwing angle ....... 5
Lens shift and positioning ............................ 6
Connections ............................................ 8
Before connecting to the projector .............. 8
Connecting example: COMPONENT IN/
S-VIDEO IN/VIDEO IN .................................... 8
Connecting example: HDMI
IN/
COMPUTER
IN ........................................... 8
Basic Operation
Switching the projector on/off ............... 9
Power cord .................................................. 9
Power indicator ......................................... 10
Switching on the projector ......................... 11
Switching off the projector ......................... 11
Projecting an image .............................. 12
Selecting the input signal .......................... 12
Positioning the image ................................ 12
Remote control operation .................... 13
Operating range ........................................ 13
Managing the lens control settings ............ 13
Switching the picture mode ....................... 13
Adjusting the image ................................... 13
Loading a saved setting ............................ 14
VIERA Link ................................................ 14
Adjusting the signal condition
with a waveform ........................................ 14
Capturing an image ................................... 14
Resetting to the factory default settings .... 14
SUB MENU ............................................... 15
Switching the input signal .......................... 15
Using the assigned function
as a shortcut .............................................. 15
To Next Page
Loading...
