Panasonic PT-AE4000U

Technical Information
E
NGLISH - 43
J
Cable specications
(When connected to a personal computer)
NC
NC
NC
NC
NC
NC
NC
NC
Projector
PC (DTE)
J
Control commands
Command Control contents Remarks
PON
POWER ON
In standby mode, all commands other than the PON command are ignored.
The PON command is ignored during lamp ON control.
POF
POWER OFF
If a PON command is received while the cooling fan is operating after the lamp has switched
off, the lamp is not turned back on again straight away in order to protect the lamp.
IIS
INPUT
CP1 = COMPONENT IN
SVD = S-VIDEO IN VID = VIDEO IN
HD1 = HDMI1 IN HD2 = HDMI2 IN
HD3 = HDMI3 IN RG1 = COMPUTER IN
OMN
MENU Displays the main menu.
OEN
ENTER Activates the selected items in the menu mode.
OBK
RETURN Returns to the previous menu or escaping from the menu mode.
OCU/OCD/
OCL/OCR
Navigation buttons
OCU = ▲ cursor OCL =
◄ cursor
OCD =
▼ cursor OCR = ► cursor
OLE
LENS Same function as the LENS button on the remote control.
OST
DEFAULT Resets to the factory default setting. (page 14)
OFZ
FREEZE
Freezes the projected screen.
0 = OFF 1 = ON
FC1
FUNCTION BUTTON Activates the function that is assigned to the FUNCTION button of the remote control.
OOT
SLEEP
Sets the duration of time to turn off the power automatically. (See “SLEEP” on page 41.)
0 = OFF 1 = 60 min. 2 = 90 min. 3 = 120 min. 4 = 150 min.
5 = 180 min. 6 = 210 min. 7 = 240 min.
OSH
BLANK
Turns off the projection temporarily.
Sends the command to switch between ON and OFF.
Do not send the command consecutively.
OVM
PICTURE Activates the PICTURE menu. Send the command to switch menu items. (page 13)
OWM
WAVEFORM
Activates the WAVEFORM. (page 14)
0 = OFF
1 = FULL SCAN (Y) 5 = SINGLE LINE SCAN (Y)
2 = FULL SCAN (R) 6 = SINGLE LINE SCAN (R)
3 = FULL SCAN (G) 7 = SINGLE LINE SCAN (G)
4 = FULL SCAN (B) 8 = SINGLE LINE SCAN (B)
VS1
ASPECT Switches the aspect ratio. (page 32)
VPM
PICTURE MODE
Switches the PICTURE MODE. (page 13)
NOR = NORMAL DYN = DYNAMIC CL1 = COLOR1 CL2 = COLOR2
CN1 = CINEMA1 CN2 = CINEMA2 CN3 = CINEMA3
OMM
MEMORY LOAD
Same function as the MEMORY LOAD button on the remote control.
DPA
PICTURE ADJUSTMENT
Same function as the PICTURE ADJUSTMENT button on the remote control.
DCM
COLOR MANAGEMENT
Displays the COLOR MANAGEMENT menu.
OVL
VIERA LINK
Same function as the VIERA Link button on the remote control.
OSM
SUB MENU
Same function as the SUB MENU button on the remote control.
▼