Panasonic PT-AE4000U

OPTION menu
40 -
E
NGLISH
TRIGGER 1/2 SETTING
You can set the input/output function for each TRIGGER
terminal.
There are 2 functions, INPUT and OUTPUT.
OUTPUT function
It is possible to control the external equipment
which have trigger terminals by transmitting the
trigger output signal.
INPUT function
It is possible to control the projector from external
equipment by receiving the trigger input signal.
INPUT GUIDE
OSD DESIGN
OSD POSITION
BACK COLOR
STARTUP LOGO
AUTO SEARCH
HDMI SIGNAL LEVEL
FRAME RESPONSE
INSTALLATION
TRIGGER 1 SETTING
TRIGGER 2 SETTING
SLEEP
HIGH ALTITUDE MODE
LAMP POWER
VIERA LINK SETTINGS
TEST PATTERN
LAMP RUNTIME
DETAILED
TYPE1
CENTER
BLUE
ON
ON
NORMAL
NORMAL
FRONT/DESK
OFF
OFF
OFF
OFF
NORMAL
0H
PICTURE
POSITION
LANGUAGE
LENS CONTROL
FUNCTION BUTTON
VIERA LINK
OPTION
ENTER
RETURN
SELECT
Select 1. TRIGGER 1 or TRIGGER 2 SETTING in
the OPTION menu and press the ENTER button.
POWER ON
SELECT LENS MEMORY 1
SELECT LENS MEMORY 2
SELECT LENS MEMORY 3
SELECT LENS MEMORY 4
SELECT LENS MEMORY 5
SELECT LENS MEMORY 6
BLANK
SELECT 4:3 ASPECT
SELECT 16:9 ASPECT
SELECT S16:9 ASPECT
SELECT JUST ASPECT
SELECT ZOOM ASPECT
SELECT H-FIT ASPECT
SELECT V-FIT ASPECT
RS-232C COMMAND LINK
DELAY TIME
OUTPUT
OFF
INPUT
POWER ON/OFFBLANK
Press ▲ ▼ ◄ ► to select your required input/2.
output function and press the ENTER button.
OFF
Unable to transmit the trigger output signal.
It does not work even if trigger input signal is received.
(Enable to receive the trigger input signal)
OUTPUT
OPTIONS
POWER ON SELECT 4:3 ASPECT*
SELECT LENS MEMORY 1 SELECT 16:9 ASPECT
SELECT LENS MEMORY 2 SELECT S16:9 ASPECT*
SELECT LENS MEMORY 3 SELECT JUST ASPECT
SELECT LENS MEMORY 4 SELECT ZOOM ASPECT*
SELECT LENS MEMORY 5 SELECT H-FIT ASPECT
SELECT LENS MEMORY 6 SELECT V-FIT ASPECT
BLANK RS-232C COMMAND LINK
When the selected trigger item is chosen in the projector
menu, 12 V is outputted.
BLANK
•
When BLANK is activated, output is 12 V, but if the setting
is released, output is 0 V.
RS-232C COMMAND LINK
•
By receiving the command from external equipment, it
conforms and outputs 12 V.
When
•
AUTO is selected in the ASPECT menu, it may
automatically select 4:3/16:9/ZOOM ASPECT depending
on the input signal. When this matches the aspect
selected in the trigger menu, 12 V is automatically output
from the trigger terminal, but if other aspects are selected,
output is 0 V.
INPUT
OPTIONS
POWER ON/OFF BLANK
POWER ON/OFF
•
If the trigger input signal from the external equipment is
changed from 0 V to 12 V, the projector power will be
switched on. And if it is changed from 12 V to 0 V, the
power will be switched off.
BLANK
•
If the trigger input signal from the external equipment is
changed from 0 V to 12 V, the screen will go blank. And if
it is changed from 12 V to 0 V, the BLANK setting will be
released.