Panasonic PT-AE4000U

PICTURE menu
22 -
E
NGLISH
Adjusting with luminance options
Q
Press the 1. ENTER button several times to display
FULL SCAN(Y)/SINGLE LINE SCAN(Y).
In SINGLE LINE SCAN mode, select the required
adjusting point by pressing ▲ ▼.
Press the 2. PICTURE ADJUSTMENT button and
display the BRIGHTNESS by pressing ▲ ▼.
When ADVANCED MENU is displayed, press the
button again to switch to the PICTURE menu.
Adjust by pressing ◄ ►.3.
Adjust the bottom line of the waveform to 0 % (0 or
7.5 IRE).
Setting range: −32 to +32
Press ▲ ▼ to display the 4. CONTRAST.
Adjust by pressing ◄ ►.5.
Adjust the up line of the waveform to 100 %
(100 IRE).
Setting range: −64 to +64
FULL SCAN(Y)/SINGLE LINE SCAN(Y)
BRIGHTNESS
Adjust the bottom line of the
waveform to 0 % (0 or 7.5 IRE)
CONTRAST
Adjust the top line of the waveform
to 100 % (100 IRE)
Adjusting with RGB options
Q
Press the 1. ENTER button several times to display
the required R/G/B waveform option.
In SINGLE LINE SCAN mode, select the required
adjusting point by pressing ▲ ▼.
Press the 2. PICTURE ADJUSTMENT button and
display the BRIGHTNESS R/BRIGHTNESS G/
BRIGHTNESS B by pressing ▲ ▼.
When PICTURE menu is displayed, press the button
again to switch to the ADVANCED MENU.
Adjust by pressing ◄ ►.3.
Adjust the bottom line of the waveform to 0 % (0 or
7.5 IRE).
Setting range: −16 to +16
Press ▲ ▼ to display the 4. CONTRAST R/
CONTRAST G/CONTRAST B.
Adjust by pressing ◄ ►.5.
Adjust the up line of the waveform to 100 %
(100 IRE).
Setting range: −32 to +32
FULL SCAN(R)/SINGLE LINE SCAN(R)
BRIGHTNESS R
Adjust the bottom line of the
waveform to 0 % (0 or 7.5 IRE)
CONTRAST R
Adjust the top line of the waveform
to 100 % (100 IRE)
FULL SCAN(G)/SINGLE LINE SCAN(G)
BRIGHTNESS G
Adjust the bottom line of the
waveform to 0 % (0 or 7.5 IRE)
CONTRAST G
Adjust the top line of the waveform
to 100 % (100 IRE)
FULL SCAN(B)/SINGLE LINE SCAN(B)
BRIGHTNESS B
Adjust the bottom line of the
waveform to 0 % (0 or 7.5 IRE)
CONTRAST B
Adjust the top line of the waveform
to 100 % (100 IRE)
SPLIT ADJUST
You can perform image adjustment for some PICTURE
menu items while displaying a certain area of the frozen
image in a split window.
SPLIT ADJUST MODE
Q
Select the required split style from NORMAL and
REVERSE in the SPLIT ADJUST MODE menu.
NORMAL
MOVE AREA GO TO SPLIT ADJUSTENTERGO TO FREEZE SCREENRETURN
REVERSE
MOVE AREA GO TO SPLIT ADJUSTENTERGO TO FREEZE SCREENRETURN
Adjusting the image in a split window
Q
Select 1. AREA SELECT and press the ENTER
button.
The image will be frozen and the area cursor will be
displayed.
MOVE AREA GO TO SPLIT ADJUSTENTERGO TO FREEZE SCREENRETURN
Press ◄ ► to move the area cursor to select the 2.
area of interest and press the ENTER button.
The selected frozen image will be displayed in a split
window.