Panasonic PT-AE4000U - Handling Batteries and Lamp Unit

Setting up
E
NGLISH - 7
Projector location range
J
You can determine where to locate the screen and the projector by considering the lens shift possibilities.
When the screen position is xed
Q
Projector
H
V
SH
SW
Placement
Screen
Vertical center of
screen
Center of lens
When the projector position is xed
Q
100 %
100 %
40 % 40 %
Projector
Shift range
NOTE:
When the projector is located right in front of the center of the screen and the lens shift dials is centered, you will get the •
best quality of the projection image.
When the • Lens shift dial • Vertical is at the vertical limit of the shift range, you cannot turn the dial to the horizontal limit,
likewise when the Lens shift dial • Horizontal is at the horizontal limit of the shift range, you cannot turn the dial to the
vertical limit.
When the projector is tilted and adjusting • KEYSTONE, the center of the screen and the lens need to be realigned.
Do not force the lens shift dials to turn as this may damage the projector. Turning the dials maximum limit is 3 or 4 times •
from the default position.