Panasonic PT-D9510E

52
ENGLISH
Adjusting the blanking
Adjustment procedure
Press the MENU button. ... The MENU screen will be displayed.
Press the UP ( ) and DOWN ( ) arrow buttons to select POSITION.
Press the ENTER button. ... The POSITION screen will be displayed.
Press the UP ( ) and DOWN ( ) arrow buttons to select BLK.
Press the ENTER button. ... The BLK screen will be displayed.
Press the control level buttons ( + and − ) to select the desired BLK mode from
those indicated below.
UPPER, LOWER, LEFT, RIGHT
Press the UP ( ) and DOWN ( ) arrow buttons to adjust UPPER and LOWER,
or Press the LEFT ( ) and RIGHT( ) arrow buttons to adjust LEFT and RIGHT.
• The adjustment values will change from 0 (min.) to 511 (max.).
MENU
AUTO SETUP
LENS
PICTURE
POSITION
OPTION
SIGNALLIST
TEST PATTERN
MENU :
SUBMENU : ENTER
EXIT : MENU
BLK：UPPER
UPPER : nnnn
LOWER: nnnn
LEFT : nnnn
RIGHT : nnnn
SELECT :＋ −
ADJUST :
EXIT : MENU
If picture noise appears at the perimeter of the screen or a picture extends off the screen a little, adjust the
blanking to fine-tune the screen.
If the button is pressed,
the blanking portion moves
upward. If the button is
pressed, the blanking portion
moves downward.
If the button is pressed,
the picture moves upward.
If the button is pressed,
the blanking portion moves
downward
If the button is pressed,
the picture moves to the right.
If the button is pressed,
the blanking portion moves
to the left.
If the button is pressed,
the blanking portion moves to
the right. If the button is
pressed, the blanking
portion moves to the left.
＜When adjusting the left blanking＞
＜When adjusting the lower blanking＞
＜When adjusting the right blanking＞
＜When adjusting the upper blanking＞
POSITION
SHIFT
SIZE
BLK
CLOCKPHASE
INPUTRESOLUTION
CLAMPPOSITION
KEYSTONE
EDGEBLENDING
MENU :
SUBMENU : ENTER
EXIT : MENU