57
ENGLISH
NOTE
Adjusting the picture quality
The following procedures can be used to adjust the picture quality to the desired setting.
Adjustment procedure
Press the MENU button. ... The MENU screen will be displayed.
Press the UP ( ) and DOWN ( ) arrow buttons to select PICTURE.
Press the ENTER button. ... The PICTURE screen will be displayed.
• If a or indicator is shown at the bottom or top of the adjustment items
list in the PICTURE window, it indicates that the remaining part of the list can
be scrolled up or down in the window. Use the UP or DOWN arrow button
( ) to scroll the list.
Press the UP ( ) and DOWN ( ) arrow buttons to step through the
adjustment items list until you reach the target item.
Press the LEFT ( ) and RIGHT ( ) arrow buttons to change the current
setting.
• For available adjustment items and settings, see the table on the next page.
MENU
AUTO SETUP
LENS
PICTURE
POSITION
OPTION
SIGNALLIST
TEST PATTERN
MENU :
SUBMENU : ENTER
EXIT : MENU
PICTURE
COLOR TEMP : ****
BRIGHT :nnn
CONTRAST :nnn
COLOR :nnn
TINT :nnn
SHARPNESSH :nnn
SHARPNESSV :nnn
NR :*****
GAMMAMODE :2.2
MENU :
SELECT :
EXIT : MENU
PICTURE
TINT :nnn
SHARPNESSH :nnn
SHARPNESSV :nnn
NR :***
GAMMA MODE :n
FILTER :***
FRAMERATE :***
PALCINEMA :***
COLORMATCHING :***
MENU :
SELECT :
EXIT : MENU
indicator
indicator