Panasonic PT-D9510E

65
ENGLISH
Displaying a test pattern
17 types of test pattern are built in. These test patterns can be used to check the various adjustment settings.
Use the following procedure to display a test pattern.
•These test patterns cannot reflect the adjustment results of various picture settings such as picture
quality, positions, and sizes. Be sure to project an external input signal for various adjustments.
Operating procedure
Press the MENU button. ... The MENU screen will be displayed.
Press the UP ( ) and DOWN ( ) arrow buttons to select TEST PATTERN.
Press the LEFT ( ) and RIGHT ( ) arrow buttons to select the required test
pattern.
Test pattern display chart ( LEFT and RIGHT arrow buttons)
MENU
AUTO SETUP
LENS
PICTURE
POSITION
OPTION
SIGNALLIST
TEST PATTERN
TESTOFF : STD
MENU :
CHANGE :
EXIT : MENU
MENU
screen
+
Input picture
MENU
screen
+
Focus
MENU
screen
+
Convergence
MENU
screen
+
Flag
(reversal)
MENU
screen
+
Flag
MENU
screen
+
Window
MENU
screen
+
Dot
(reversal)
MENU
screen
+
Dot
MENU
screen
+
Colour bar
MENU
screen
+
Window
(reversal)
MENU
screen
+
Crosshatch
(reversal)
MENU
screen
+
V-Gray scale
MENU
screen
+
H-Gray scale
(reversal)
MENU
screen
+
V-Gray scale
(reversal)
MENU
screen
+
Crosshatch
MENU
screen
+
Full white
MENU
screen
+
Full black
MENU
screen
+
H-Gray scale
NOTE