Chapter 4 Settings — [SECURITY] menu
ENGLISH - 201
r [SLOT1 BUTTON]
The items from [SDI1 [SLOT1]] to [SDI4 [SLOT1]] can be selected when the optional Interface Board with the
corresponding input (3G-SDI Terminal Board with Audio (Model No.: TY-TBN03G) or Interface Board for 12G-SDI
(Model No.: ET-MDN12G10)) is installed in <SLOT 1>.
[HDMI1 [SLOT1]] and [HDMI2 [SLOT1]] can be selected when the optional Interface Board for HDMI 2 input
(Model No.: ET-MDNHM10) is installed in <SLOT 1>.
[DVI-D1 [SLOT1]] and [DVI-D2 [SLOT1]] can be selected when the optional Interface Board for DVI-D 2 input
(Model No.: ET-MDNDV10) is installed in <SLOT 1>.
[TOGGLE] Switches the input of the Interface Board installed in <SLOT 1> in turn when the button is operated.
[SDI1 [SLOT1]] Fixes to selection operation of the SDI1 input of the Interface Board.
[SDI2 [SLOT1]] Fixes to selection operation of the SDI2 input of the Interface Board.
[SDI3 [SLOT1]] Fixes to selection operation of the SDI3 input of the Interface Board.
[SDI4 [SLOT1]] Fixes to selection operation of the SDI4 input of the Interface Board.
[HDMI1 [SLOT1]] Fixes to selection operation of the HDMI1 input of the Interface Board.
[HDMI2 [SLOT1]] Fixes to selection operation of the HDMI2 input of the Interface Board.
[DVI-D1 [SLOT1]] Fixes to selection operation of the DVI-D1 input of the Interface Board.
[DVI-D2 [SLOT1]] Fixes to selection operation of the DVI-D2 input of the Interface Board.
[DISABLE] Disables button operations.
r [SLOT2 BUTTON]
The items from [SDI1 [SLOT2]] to [SDI4 [SLOT2]] can be selected when the optional Interface Board with the
corresponding input (3G-SDI Terminal Board with Audio (Model No.: TY-TBN03G) or Interface Board for 12G-SDI
(Model No.: ET-MDN12G10)) is installed in <SLOT 2>.
[HDMI3 [SLOT2]] and [HDMI4 [SLOT2]] can be selected when the optional Interface Board for HDMI 2 input
(Model No.: ET-MDNHM10) is installed in <SLOT 2>.
[DVI-D3 [SLOT2]] and [DVI-D4 [SLOT2]] can be selected when the optional Interface Board for DVI-D 2 input
(Model No.: ET-MDNDV10) is installed in <SLOT 2>.
[TOGGLE] Switches the input of the Interface Board installed in <SLOT 2> in turn when the button is operated.
[SDI1 [SLOT2]] Fixes to selection operation of the SDI1 input of the Interface Board.
[SDI2 [SLOT2]] Fixes to selection operation of the SDI2 input of the Interface Board.
[SDI3 [SLOT2]] Fixes to selection operation of the SDI3 input of the Interface Board.
[SDI4 [SLOT2]] Fixes to selection operation of the SDI4 input of the Interface Board.
[HDMI3 [SLOT2]] Fixes to selection operation of the HDMI3 input of the Interface Board.
[HDMI4 [SLOT2]] Fixes to selection operation of the HDMI4 input of the Interface Board.
[DVI-D3 [SLOT2]] Fixes to selection operation of the DVI-D3 input of the Interface Board.
[DVI-D4 [SLOT2]] Fixes to selection operation of the DVI-D4 input of the Interface Board.
[DISABLE] Disables button operations.
[CONTROL DEVICE PASSWORD CHANGE]
The control device password can be changed.
1) Press as to select [CONTROL DEVICE PASSWORD CHANGE].
2) Press the <ENTER> button.
f The [CONTROL DEVICE PASSWORD CHANGE] screen is displayed.
3) Press asqw to select the text, and press the <ENTER> button to enter the text.
4) Press asqw to select [OK], and press the <ENTER> button.
f To cancel, select [CANCEL].
Attention
f The initial password is “AAAA” as the factory default setting or when the [PROJECTOR SETUP] menu → [INITIALIZE] → [ALL USER DATA]
is executed.
f Change the password periodically that is hard to guess.
To Next Page
Loading...
