Chapter 5 Operations — Web control function
ENGLISH - 211
Web control function
Following operation is possible from a computer using the web control function.
f Setting and adjustment of the projector
f Display of the projector status
f Sending E-mail messages when there is a problem with the projector
The projector supports “Crestron Connected”, and the following application software of Crestron Electronics, Inc.
can be used.
f RoomView Express
f Crestron Fusion
Note
f Communication with an E-mail server is required to use the E-mail function. Conrm that the E-mail can be used beforehand.
f “Crestron Connected” is a system of Crestron Electronics, Inc. that collectively manages and controls devices on multiple systems
connected to a network using a computer.
f For details of the “Crestron Connected”, visit the website of Crestron Electronics, Inc. (English only.)
URL https://www.crestron.com/
Download “RoomView Express” from the Crestron Electronics, Inc. website. (English only.)
URL https://www.crestron.com/en-US/resources/get-roomview
Computer that can be used for setting
To use the web control function, a web browser is required. Conrm that the web browser can be used in
advance.
OS Compatible browser
Windows Internet Explorer 11.0, Microsoft Edge
Mac OS Safari 8.0/9.0/10.0/11.0
iOS Safari (equipped with version iOS 9, iOS 10, or iOS 11)
Android Google Chrome (equipped with version Android 4.4/5.0/5.1/6.0/7.0/8.0)
Accessing from the web browser
1) Start up the web browser on the computer.
2) Enter the IP address set on the projector into the URL entry field of the web browser.
3) Enter the user name and the password.
f The factory default settings are User name: dispuser (user rights)/dispadmin (administer rights); Password:
@Panasonic.
f Change of password is prompted when using the web control function for the rst time. Proceed to Step 4).
If the web control function is used already, proceed to Step 7).
To Next Page
Loading...
