Chapter 1 Preparation — Precautions for use
28 - ENGLISH
Optional accessories
Optional accessories (product name) Model No.
Projection lens
Zoom Lens
ET-D3LEW60, ET-D3LET80, ET-D3LEW10, ET-D3LES20,
ET-D75LE6, ET-D75LE8, ET-D75LE10, ET-D75LE20,
ET-D75LE30, ET-D75LE40
Fixed-focus Lens ET-D3LEW50, ET-D75LE95
Fisheye Lens ET-D3LEF70
Stepping Motor Kit ET-D75MKS10
Lens Fixed Attachment ET-PLF10
Interface Board
Interface Board for HDMI 2
input
ET-MDNHM10
Interface Board for DVI-D
2 input
ET-MDNDV10
3G-SDI Terminal Board with
Audio
TY-TBN03G
Interface Board for 12G-SDI ET-MDN12G10
Ceiling Mount Bracket
ET-PKD520H (for High Ceilings), ET-PKD520S (for Low
Ceilings), ET-PKD520B (Projector Mount Bracket)
Frame ET-PFD510
Early Warning Software
(Basic license/3-year license)
ET-SWA100 Series
*1
Upgrade Kit ET-UK20
Auto Screen Adjustment Upgrade Kit ET-CUK10
Auto Screen Adjustment Upgrade Kit (PC) ET-CUK10P
Digital Interface Box ET-YFB100G
DIGITAL LINK Switcher ET-YFB200G
*1 The sufx of the Model No. differs according to the license type.
Note
f The Fixed-focus Lens (Model No.: ET-D75LE50, ET-D75LE90) (production discontinued) can also be used.
f The Zoom Lens (Model No.: ET-D3LEW60, ET-D3LET80, ET-D3LEW10, ET-D3LES20) is equipped with a stepping motor
unit as standard.
f The Zoom Lens (Model No.: ET-D3LEW60, ET-D3LET80, ET-D3LEW10, ET-D3LES20), Fixed-focus Lens (Model
No.: ET-D3LEW50), and Fisheye Lens (Model No.: ET-D3LEF70) are equipped with EEPROM (Electrically Erasable
Programmable Read-Only Memory) with the information of [LENS TYPE] written in.
f The Stepping Motor Kit (Model No.: ET-D75MKS10) is a product to replace the standard DC motor unit installed in the Zoom
Lens (Model No.: ET-D75LE6, ET-D75LE8, ET-D75LE10, ET-D75LE20, ET-D75LE30, ET-D75LE40) with the stepping motor
unit. For how to replace the motor of the Zoom Lens, refer to the Operating Instructions of the Stepping Motor Kit.
f When using the Fisheye Lens (Model No.: ET-D3LEF70), it is recommended to use together with the Lens Fixed Attachment
(Model No.: ET-PLF10).
f To use the 3G-SDI Terminal Board with Audio (Model No.: TY-TBN03G), it is necessary for the rmware version of the
3G-SDI Terminal Board with Audio to be 2.00 or later. Consult your dealer regarding the version update to the latest rmware
if the version is earlier than 2.00.
For details on how to conrm the rmware version, refer to “How to conrm the rmware version of the Interface Board
(optional)” (x page 36).
f When performing the simultaneous input of the 4K image (resolution of 3 840 x 2 160 or 4 096 x 2 160) using the Interface
Board for HDMI 2 input (Model No.: ET-MDNHM10), it is necessary for the rmware version of the Interface Board for HDMI
2 input to be 2.00 or later. If the version is earlier than 2.00, the simultaneous process is not performed even if corresponding
signal is input. Consult your dealer regarding the version update to the latest rmware.
For details on how to conrm the rmware version, refer to “How to conrm the rmware version of the Interface Board
(optional)” (x page 36).
f The expansion function by applying the optional Upgrade Kit (Model No.: ET-UK20) cannot be used when the video signal in
simultaneous format is input.
f The model numbers of optional accessories are subject to change without prior notice.
f The optional accessories described in this document are as of August 2018. Optional accessories may be added or changed
without prior notice.
For the latest information, visit the Panasonic website (https://panasonic.net/cns/projector/).
To Next Page
Loading...
