Panasonic PT-RQ22K

Chapter 3 Basic Operations — Projecting
86 - ENGLISH
When operating from the lens shift adjustment screen
1) Press the <DEFAULT> button on the remote control while displaying the lens shift adjustment screen.
f The conrmation screen is displayed.
2) Press qw to select [OK], and press the <ENTER> button.
f [PROGRESS] is displayed in the [HOME POSITION] screen, and the projection lens is moved to the origin
position.
Note
f The [HOME POSITION] screen is not displayed when the [PROJECTOR SETUP] menu → [LENS] → [LENS TYPE] is set to [NOT
SELECTED].
f The projection lens is not moved to the correct home position when the [PROJECTOR SETUP] menu → [LENS] → [LENS TYPE] is set
incorrectly. Change the setting if the type is different from the projection lens attached to the projector.
f The projection lens is not moved to the correct home position when the [PROJECTOR SETUP] menu → [LENS] → [LENS CALIBRATION]
is not executed.
f The home position varies depending on the projection lens type. For details, refer to “Lens shift range” (x page 86).
f The home position of the Fixed-focus Lens (Model No.: ET-D75LE95, ET-D75LE90) may deviate from the designed position.
f The [HOME POSITION] screen can also be displayed by pressing the <LENS> button on the control panel or the <SHIFT> button on the
remote control for three seconds or longer.
Lens shift range
The projector can adjust the position of the projected image within the lens shift range for each projection lens
based on the position of the projected image in the home position (standard projection position).
Perform the lens shift adjustment within the range indicated in the following illustration. Note that moving the lens
outside the adjustment range may change the focus. This is because the shift of the lens is restricted to protect
the optical parts.
Following illustration indicates the lens shift range when the projector is installed on desk/oor.
Projection lens Model No.
ET-D3LET80, ET-D3LEW10, ET-D3LES20,
ET-D75LE8, ET-D75LE10, ET-D75LE20,
ET-D75LE30, ET-D75LE40
ET-D3LEW60, ET-D75LE6
Lens shift range
Projected image width H
Standard projection position
Projected image height V
0.29 H 0.29 H
0.15 V 0.15 V
0.59 V
0.59 V
Origin position of the lens
mounter
Projected image width H
Standard projection position
Projected image height V
0.19 H
0.19 H
0.24 V
0.24 V
0.56 V
0.56 V
Origin position of the lens
mounter
Projection lens Model No. ET-D75LE95 ET-D75LE90
Lens shift range
Projected image width H
0.21 H 0.21 H
0.10 V
0.16 H 0.16 H
0.08 V
0.74 V
Projected image height V
0.05 V
Standard projection position
Origin position of the lens mounter
Projected image width H
Standard projection position
0.16 H
0.12 H
Projected image height V
0.10 V
0.74 V
Origin position of the lens mounter