Panasonic PT-RQ32K

Chapter 4 Settings — [DISPLAY OPTION] menu
116 - ENGLISH
[SINGLE] Sets each of the SDI1 input, the SDI2 input, the SDI3 input, and the SDI4 input to single link.
[DUAL/SINGLE]
Sets the SDI1 input and the SDI2 input to dual link, and the SDI3 input and the SDI4 input to single
link.
[SINGLE/DUAL]
Sets the SDI1 input and the SDI2 input to single link, and the SDI3 input and the SDI4 input to dual
link.
[DUAL/DUAL] Sets the SDI1 input and the SDI2 input to dual link, and the SDI3 input and the SDI4 input to dual link.
[QUAD]
Sets the SDI1 input, the SDI2 input, the SDI3 input, and the SDI4 input to quad link.
(Factory default setting)
6) Press the <ENTER> button.
Note
f The single link is a setting to display one image with one input signal. The dual link is a setting to display one image with two input signals.
The quad link is a setting to display one image with four input signals.
f [SDI LINK] is xed to [SINGLE] in the following cases.
g When the [DISPLAY OPTION] menu → [SIMUL INPUT SETTING] is set to anything other than [OFF]
g When the [MULTI DISPLAY] menu → [MULTI DISPLAY MODE] is set to anything other than [OFF] and displaying the four-screen display
f The [SDI LINK] setting cannot be changed when the [DISPLAY OPTION] menu → [BACKUP INPUT SETTING] → [BACKUP INPUT MODE]
is set as the combination to use the SDI input equipped on the projector as standard.
f [3G-SDI MAPPING] cannot be set when [SDI LINK] is set to [AUTO].
f The content set is displayed in [SDI LINK SETTINGS].
Setting [RESOLUTION] in [SDI IN]
1) Press as to select [SDI IN].
2) Press the <ENTER> button.
f The [SDI IN] screen is displayed.
3) Press as to select [SINGLE LINK SETTING], [DUAL LINK SETTING], or [QUAD LINK SETTING], and
press the <ENTER> button.
f The [SINGLE LINK SETTING] screen, the [DUAL LINK SETTING] screen, or the [QUAD LINK SETTING]
screen is displayed.
f When [QUAD LINK SETTING] is selected, proceed to Step 5).
4) Press as to select [SDI1], [SDI2], [SDI3], [SDI4], [SDI1-2], or [SDI3-4], and press the <ENTER> button.
f The [SINGLE LINK SETTING] screen or [DUAL LINK SETTING] screen for the selected item is displayed.
5) Press as to select [RESOLUTION], and press the <ENTER> button.
f The [RESOLUTION] screen is displayed.
6) Press as to select the item, and press the <ENTER> button.
f Select [AUTO], [720x480i], [720x576i], [1280x720p], [1920x1080i], [1920x1080p], [1920x1080sF], or
[2048x1080p] when [SINGLE LINK SETTING] is selected.
f Select [AUTO], [1920x1080i], [1920x1080p], [1920x1080sF], [2048x1080p], [3840x2160p], or [4096x2160p]
when [DUAL LINK SETTING] is selected.
f Select [AUTO], [3840x2160p], [3840x2160sF], or [4096x2160p] when [QUAD LINK SETTING] is selected.
Setting [4K DIVISION] in [SDI IN]
Set the transmission method in the 4K division when displaying the 4K image with dual link or quad link.
1) Press as to select [SDI IN].
2) Press the <ENTER> button.
f The [SDI IN] screen is displayed.
3) Press as to select [DUAL LINK SETTING] or [QUAD LINK SETTING], and press the <ENTER> button.
f The [DUAL LINK SETTING] screen or the [QUAD LINK SETTING] screen is displayed.
f When [DUAL LINK SETTING] is selected, press as to select [SDI1-2] or [SDI3-4], and press the
<ENTER> button.
4) Press as to select [4K DIVISION].