Chapter 4 Settings — [P IN P] menu
172 - ENGLISH
16) Press qw to switch the item.
[MAIN WINDOW] The main window has display priority.
[SUB WINDOW] The sub window has display priority.
Note
f The P IN P function may not be available for some signals being input or terminals being selected. Refer to “Two-window display
combination list” (x page 235) for details.
f Images in combination of DIGITAL LINK and other inputs cannot be displayed in P IN P.
f The main window setting values are applied as image adjustment values such as the [PICTURE] menu → [PICTURE MODE]/[GAMMA]/
[COLOR TEMPERATURE].
f While in the normal screen (where no menu is displayed), press qw to switch the sizes and positions of the main window and sub window
while P IN P is operating.
f [P IN P] cannot be set when the [ADVANCED MENU] menu → [FRAME RESPONSE] is set to anything other than [NORMAL].
f [P IN P] cannot be set when the [DISPLAY OPTION] menu → [BACKUP INPUT SETTING] → [BACKUP INPUT MODE] is set to anything
other than [OFF].
f [P IN P] cannot be set when the [DISPLAY OPTION] menu → [IMAGE ROTATION] is set to anything other than [OFF].
f 3D images cannot be displayed while in P IN P.
f [P IN P] cannot be set when the [DISPLAY OPTION] menu → [SIMUL INPUT SETTING] is set to anything other than [OFF].
f [P IN P] cannot be set when the [DISPLAY OPTION] menu → [SDI IN] → [SDI LINK] is set to [AUTO].
To Next Page
Loading...
