Panasonic PT-RZ21K

Chapter 3 Basic Operations — Operating with the remote control
ENGLISH - 81
Displaying internal test pattern
The projector has nine types of internal test patterns to check the condition of the projector. To display test
patterns, perform the following steps.
button
1) Press the <TEST PATTERN> button.
2) Press qw to select the test pattern.
Note
f Test patterns can also be displayed using the menu operation. Refer to “[TEST PATTERN] menu” (x page 173) for details.
f Settings of position, size, and other factors will not be reected in test patterns. Make sure to display the input signal before performing
various adjustments.
Using the status function
Display the status of the projector.
button
1) Press the <STATUS> button.
f The [STATUS] screen is displayed.
100000h
100000h / 100000h
1/6
1.00 / 1.00
1h 23m
27°C/80°F
31°C/87°F
31°C/87°F
31°C/87°F
31°C/87°F
123456789012
MENU
EXITCHANGE
ENTER
SEND E-MAIL
SELF TEST
NO ERRORS
LIGHT2 TEMP.
LIGHT1 TEMP.
EXHAUST AIR TEMP.
OPTICS MODULE TEMP.
INTAKE AIR TEMP.
MAIN/SUB VERSION
CONTINUOUS LIGHTING TIME
LIGHT RUNTIME
PROJECTOR RUNTIME
PROJECTOR TYPE
STATUS
PT-RZ21K
SERIAL NUMBER
Note
f The projector status can also be displayed using the menu operation. Refer to the [PROJECTOR SETUP] menu → [STATUS]
(x page 166) for details.