Panasonic PT-RZ21K

Chapter 7 Appendix — Technical information
ENGLISH - 221
Control details
Art-Net channel setting
[1] [2] [3] [USER]
LENS ZOOM MSB ― ―
l l
*1
LENS ZOOM LSB ― ―
l l
*1
ENABLE/DISABLE
l l l l
*1 These items can be controlled in following case.
When the standard DC motor unit installed in the Zoom Lens (Model No.: ET‑D75LE6, ET‑D75LE8, ET‑D75LE10, ET‑D75LE20, ET‑D75LE30,
ET‑D75LE40, etc.) is replaced with the stepping motor unit using the Stepping Motor Kit (Model No.: ET‑D75MKS10), or when a projection lens with
the stepping motor is attached.
Control details
r LIGHT OUTPUT
This can be set in 256 steps between 100 % and 0 %.
Performance Parameter Default value
100 % 0
0… …
0 % 255
r INPUT SELECT (when [Art-Net CHANNEL SETTING] is set to [1])
Performance Parameter Default value
No operation 0-7
0
RGB1 8-15
RGB2 16-23
No operation 24-31
DVI-D 32-39
HDMI 40-47
SDI1 48-55
SDI2 56-63
No operation 64-127
Execute P IN P, USER1 128-135
Execute P IN P, USER2 136-143
Execute P IN P, USER3 144-151
No operation 152-255
r INPUT SELECT (when [Art-Net CHANNEL SETTING] is set to anything other than [1])
Performance Parameter Default value
No operation 0-7
0
RGB1 8-15
RGB2 16-23
DVI-D 24-31
HDMI 32-39
DIGITAL LINK 40-47
SDI1 48-55
SDI2 56-63
No operation 64-119
P IN P OFF 120-127
Execute P IN P, USER1 128-135
Execute P IN P, USER2 136-143
Execute P IN P, USER3 144-151
No operation 152-255